1.
Before the machine is started, it is necessary to read the user manual
carefully and adjust and maintain the machine according to the
regulations. The operator must master the structure and functions of the
machine.
2. The matched power must meet the requirements, and it is not allowed
to increase the spindle speed without authorization.
3. Before starting the machine, check if the direction of operation is
the same as the direction of rotation, otherwise it is strictly
prohibited to start the machine.
4. Hard objects, such as metal and stones, must not be mixed into the
materials that need to be processed, otherwise the damage to the machine
will be caused.
5. After the machine is started for a few hours, it is necessary to
observe whether each part is loose and regularly add grease to the
bearings.
6. When the materials are fed, the hands of operators are strictly
prohibited from approaching the grinding rollers to avoid personal
injury accidents. Feeding of the materials should be uniform and
appropriate, the fed materials should not be too many or too few, the
feeding should not be too fast or too slow, too fast feeding or too many
materials can easily cause the machine to get stuck and then the burnout
of the motor can be caused.
7. It is strictly prohibited to work under the influence of alcohol,
illnesses or excessive fatigue. It is also strictly prohibited for
operators with gloves, individuals with low intelligence, minors under
18 years old, elderly people over 60 years old and persons who have not
mastered the using rules of the machine to operate the machine by
themselves.
8. In the working process, if grass blockage or other faults are found,
the switch should be turned off immediately to disconnect the power
supply, and the fault should be eliminated before the operation is
conducted again. It is strictly prohibited to operate the machine with
faults.
9. Persons who are not staff members and are not familiar with the
mechanism performance of the machine are not allowed to turn on the
machine casually.
10. When the machine is not in use for a long time, it should be stored
indoors or in a shed and coated with anti-rust oil to prevent the
machine from rusting.
