|
 |
|
Double Sided
Automatic Desktop Labeling Machine |
The machine is beautiful, smart, and has a
high qualification rate. It is suitable for labeling in cosmetics,
beverages, medicine, food, general merchandise and other industries.
The design of the machine is novel and unique, and the operation and
adjustment are very convenient. The operator only needs to place the
bottle on the conveyor belt，when the bottle moves forward, the cursor
will automatically label and mark the bottle after detecting it.
It can be used for both stand-alone production and online production. |
 |
|
Product parameter: |
 |
|
Voltage: |
110V/60Hz |
| Power |
1900W |
|
Material: |
The
surface is stainless steel |
|
Conveyor width:
|
4.72in(12cm) |
|
Width of the conveyor chain plate:
|
3.93in(10cm) |
| Label inner diameter： |
2.95in(7.5cm) |
| Label outer diameter: |
10.23in(26cm) |
| Label output: |
Left output and right output |
|
Output speed: |
10-200PCS/min (Depending on
the bottle size and label length) |
| Label: |
Minimum:1.18*1.18in (3*3 cm), maximum:5.9*11.8in
(15*30 cm) |
| Suitable bottle
height： |
3.937-11.8in(10-30cm) |
| Suitable bottle diameter: |
0.787-4.72in(2-12cm) |
| Precision: |
±0.039in(±1mm
(excluding product and label errors), the debugging level
significantly affects the labeling accuracy.) |
|
Package: |
Export wooden case |
|
|
Product Analysis： |
 |
 |
 |
|
1. Speed
Controller
2. Touch Screen
3. Emergency
Stop Switch
4. Start
Switch
5. Power Switch
6. Label Head
Left-and-right Movement Handwheel
7. Conveyor
Belt
8. Bottle Press
Conveying Motor
9. Label
Adhesion Wheel
10. Brush
11. Upper Press
Height Adjustment Handwheel
12. Label Head
Height Adjustment Handwheel
13. Label Pull
Wheel Handle
14. Label Head
Front-and-rear Adjustment Handwheel
15. Speed
Controller
16. Bottle
Photoelectric Detector
17. Bottle
Separation Adjustment Handwheel
18. Bottle
Separation Speed Regulator
19. Bottle
Separation Speed Regulator
20. Guardrail
Fixing Screw
21. Guardrail
22. Bottle
Separation Belt
23. Bottle
Separation Motor
24. Upper Press
Conveyor Belt Motor
25. Conveyor
Belt Motor
26. Label Head
Left-and-right Adjustment Handwheel
27. Label Head
Front-and-rear Adjustment Handwheel
28. Side Label
Photoelectric Sensor
29. Bottle
Separation Motor
|
|
Feature: |
|
|
Multi-rod spiral positioning prevents
deviation and makes the sheet more accurate. |
|
Rubbing type labelling
Add rolling-type
labeling to effectively eliminate the bubbles during product labeling,
and the labeling is flat without wrinkles.
|
 |
 |
Adjustment
handwheel
(bottle press
device, height adjustment)
|
|
The label object is sensitive to
inspection, and the labeling efficiency is greatly improved.
|
 |
|
 |
Photo-electric detection of labels, and the
label will be released immediately when the bottle is detected to pass. |
|
This machine is equipped with a fiber
optic amplifier, which can be adjusted when the photosensitive eye cannot sense the product well.
|
 |
 |
This machine is equipped with a touch
screen display, which allows customers to set relevant data according to
their needs, making it more convenient and efficient. |
|
This machine is equipped with an
emergency stop button, which can stop the operation of the machine with
one click in case of any emergency, making it safer and more reliable. |
 |
 |
This machine is equipped with a
high-quality conveyor belt motor, which is more durable. |
|
This machine is equipped with a chain
plate conveyor belt, which is more wear-resistant and has a longer
service life. |
 |
 |
The machine is equipped with a conveyor
belt regulator, and customers can adjust the speed of the conveyor belt
according to their own needs. |
|
The machine is equipped with a conveyor
belt regulator, and customers can adjust the speed of the conveyor belt
according to their own needs.(The top red conveyor belt.） |
 |
|
 |
Customers can adjust the distance of
the guardrail according to the diameter of the bottle, and the distance
of the guardrail is adjusted by adjusting the knob. |
|
Operation process: |
|
1. Connect the 110V power supply.
2. Install the label roll.
3. Adjust the position of Label peeling board .
4. Adjust the positions of Bottle press conveyor belt and Bottle guide
conveyor belt .
5. Connect the air source.
6. Set touch screen parameters.
7. Set the conveyor belt speed.
8. Check the sensitivity of Bottle detection electric eye and Label
photoelectric detector .
9. Start the machine.
10. Test labeling.
11. Check the labeling effect.
|
|
Product
safety precautions: |
To ensure safe production, please read the
following precautions carefully:
1. Use the power supply that meets the requirements of the machine.
2. After turning off the power switch, there is still voltage in some
circuits in the electrical control of the machine. When servicing the
control circuit, be sure to unplug the power cord.
3. Do not touch the rollers with your hands during machine operation,
and pay attention to personal safety.
4. When the machine has problems, press the emergency stop button
directly to suspend all work.5.Do not
touch the photoelectric induction eye with your hands during machine
operation to prevent the machine from missensing and mislabeling.
|
|
Details: |
|
 |
|
 |
 |
|
Advantages: |
|
1. The machine is efficient and convenient to use;
2. The machine automatically labels, saving manpower and material
resources;
3. This machine has wide applicability and stable performance;
4. This machine is equipped with intelligent touch control screen, which
is more convenient to set data parameters;
5.This machine can be used with capping machine and bottle sorting
machine.
6.The components of each adjustment position are precisely matched, and
the height, width and length of the components can be easily adjusted
without the use of professional tools. The machine operation is easy and
convenient. |
|
Product display: |
 |
 |
 |
 |
|
Item include：Double
Sided Automatic Desktop Labeling Machine*1 |
|
Item Number: 160346 |
|
|
You can make order
with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
