Water Injection Saw Blade Grinder 220V

Water injection Saw Blade Grinder

The machine is an updated one with a water box could reduce the damage of grinding wheel and the high temperature. It is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm.It's also suitable to grind other material, such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc. Its fascia can support the teeth of saw blades and other parts in order to prevent jumping and improve grinding quality .

Instruction Link

Parameter:

Voltage	220V(if you need 110V,please contact with us)
Grinding Wheel Size	4.92"(12.5cm)
Bore Size of Grinding Wheel	1.26"(3.2cm)
Adjusting Range of Grinding Wheel	+/-20 degrees
Power	250w
Handle Turning Angle	30 degrees from left and 45 degrees from right
Revolution	2850rpm
Product Dimension	28.35"x16.93"x11.81"(72x43x30cm)
Package Dimension	16.93"x16.93"x13.58"(43x43x34.5cm)
Weight	70.4lbs (32kgs)

Method of operation

First ,loosing the fascia, then adjust the angle of grinding blade and fasten.

Second, adjusting of center axle

1)Rotating the center axle to the grinding blade

2)Pushing the center axle to the right

3)Installing the saw blade ,rotate the wheel and decide the position of grinding surface saw teeth

4)Rotating the rotation table to ensure the angle of grinding blade.

5)The cross angle between the grinding surface and work surface is about 5°.

Third, adjusting of positioning assembly.

1)Adjusting the saw blade to the best grinding position, rotating the positioning frame and fascia,

2)Adjusting positioning pin to the proper base of saw teeth and leave gap of grinding quantity, fasten the fixed screw.

Fourth, adjusting the center axle to the same gap of grinding quantity to the right

Last, when all the parts are fastened, the saw blade supported with hand will be grinded

Detailed Description

Item Included

1 Set of 220V Water Injection Saw Blade Grinder Machine (153035)