|
|
 |
|
Feeder Elevating Rice
Nut Conveyor Granule Food Bucket Elevator Machine PVC Belt Stainless
Steel Feeding Conveyor 220V/60Hz 1PH |
|
|
|
|
|
|
 |
|
Product
Overview |
| The PVC belt conveyor is a
professional feeding elevating device specifically designed for
lifting and conveying particle materials with low mobility, such
as mushrooms, dried vegetables, black fungus, dried fruits,
puffed food, activated carbon particles and soap granule. It has
the advantages of continuous and stable conveying, simple
structure, convenient installation and maintenance and high
adaptability, and is suitable for the industries of food,
agriculture, chemical, logistics, etc. |
|
|
Product
Parameters |
|
Important Notice Before Purchase: This feeding elevator is
suitable for poor-flowing materials. If you are unsure whether
the material you need to convey is suitable for this equipment,
please consult us first. Please do not make a blind purchase.
Thank you! |
|
Voltage |
220V 60Hz 1-phase |
|
Material of conveyor belt |
PVC |
| Power |
550W |
| Hopper capacity |
31.2us gal(118L) |
| Material handling
capacity |
1.76-2.36CFM(13.2-17.7gal/min) |
|
Width of conveyor belt |
43cm (16.9in) |
|
Size of hopper inlet |
64x64cm (25.2x25.2 inches) |
|
Feeding speed |
Adjustable |
|
Material of machine body |
SUS201 stainless steel |
|
Distance between the discharging outlet and the
ground |
1.9m (6.23ft) |
|
Applicable material |
Particle materials with low mobility |
|
Machine size |
315x75x243cm (124x29.5x95.7 inches) |
|
Net weight |
151.5kg (334LBs) |
|
 |
|
Attention |
|
1. The operator should be trained
professionally before operating the machine. It is strictly
prohibited to touch the conveyor belt, the hopper and other
running parts during operation.
2. The machine is suitable for the particle
materials with low mobility, and is not suitable for
combustible, explosive and corrosive materials.
3. Remove large impurities in the materials
to prevent the conveyor belt from blockage.
4. Be sure to empty the conveyor belt before
starting the machine.
5. Uniformly feed the materials and avoid
excessive feeding during use. |
|
|
Product
Features |
|
|
|
Control Box
The control box integrates the intelligent
controller and the emergency stop switch, achieving the accurate
drive and control and the complete safety protection and
monitoring, and ensuring reliable operation and integrated
control.
|
|
Asynchronous Motor
The high-quality asynchronous motor
integrates the advantages of simple structure, low maintenance
cost, high reliability, good overload capacity and high
operating efficiency and can work continuously for a long time.
|
|
PVC Conveyor Belt
The conveyor belt is made of the high-quality
PVC material, and has the excellent wear and corrosion
resistance, the enough friction and the good skid resistance,
ensuring the materials cannot skid or flow back in the inclined
conveying process. |
|
|
|
|
Feeding Hopper
The large-capacity feeding hopper adopts the
independent structural design, and a large quantity of materials
can be fed at one time, effectively saving time and improving
the working efficiency. The outlet baffle is adjustable to
control the feeding speed.
|
|
Universal Wheel
The four universal wheels are arranged at the
bottom of the conveyor body, the conveyor body can conveniently
move and fix in different working environments, and the
practicability and adaptability are greatly enhanced.
|
|
Stainless Steel Material
The
whole machine is made of thickened stainless steel materials,
making it firm and durable, resistant to wear and corrosion and
easy to clean and maintain. The stainless steel hopper and the
PVC conveyor belt are combined to achieve smooth feeding. |
|
|
Operation
Method |
|
(I) Preparation before use:
1. Check whether the PVC conveyor
belt is not damaged, the partitions are loose, and the
hopper and machine frame are deformed or blocked.
2. Check the wiring and lubrication
of the motor and reducer, and test the emergency stop
button to ensure proper power cut-off.
3. Clean the residual materials on
the surface of the hopper and conveyor belt to avoid
caking that may affect conveying.
4. Disperse the particle materials
with low fluidity in advance, and remove large
impurities to prevent them from blocking the hopper.
(II) Starting and feeding:
1. Press the start key to start the
machine, allow the conveyor belt to idle for 1-2
minutes, observe whether there are any abnormal noises
or blockages, and confirm that the operation is stable.
2. Gradually add a small quantity of
materials uniformly into the hopper.
(III) Stop and completion:
1. Stop feeding the materials, and
then turn off the power supply of the machine after all
the materials on the conveyor belt have been completely
delivered.
Note: It is prohibited to shut down
the machine with materials to prevent the motor from
overloading during the next startup.
2. Clean away the residual particles
on the hopper, conveyor belt and machine frame and keep
the machine dry. |
|
|
|
Application |
|
The PVC Belt Stainless Steel Feeding Conveyor
is designed for conveying particle materials with low mobility,
including the following materials:
1. Agricultural products and processed
food: with light weight, brittle, irregular shape and high
hygiene requirement
-- Edible fungi: Shiitake mushrooms, black
fungus, white fungus, ganoderma slices, etc.
-- Dried vegetables: Dried potatoes, dried
long beans, dried radish, daylily, dried mustard greens, etc.
-- Dried fruits and nuts: Raisins, jujubes,
dried apples, dried mangoes, nuts (such as walnuts and almonds),
melon seeds, peanuts, etc.
-- Grains and beans: Rice, millet (especially
when lifting is needed).
-- Puffed and leisure foods: Potato chips,
shrimp crackers, popcorn, biscuits, breakfast cereals, etc.
-- Candies and snacks: Soft candies, hard
candies, preserved fruits, honeyed fruits, chocolate beans, etc.
-- Others: Tea leaves, flower petals, pet
food (dry food), feed pellets.
2. Industrial and chemical raw materials:
Applicable to light industrial materials that
are free of special corrosion and require quantitative feeding.
-- Plastic pellets: Recycled or new pellets
such as PE, PP and ABS.
-- Light chemical products: Mothballs, soap
granules, some fertilizer pellets, wood pellets, etc.
-- Environmental protection materials:
Activated carbon particles, molecular sieves, some desiccants,
etc. |
|
|
Product
Display |
 |
 |
 |
|
|
Item Number (057277): 1 x Feeder Elevating
Rice Nut Conveyor 220V |
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|
