2. Do not overload the machine beyond rated capacity, and avoid extremely small loads. Remove hard objects such as coins and keys from garments to prevent drum damage.

3. Close the door and ensure the safety lock engages fully before starting any program. Never attempt to forcibly open the door while the machine is running. In case of emergency, press the urgent stop button and cut off power before troubleshooting.

4. Do not touch the door or cabinet during operation. The machine vibrates during high-speed spinning. Do not lean against or pry the unit.

5. Keep the laundry room well ventilated and dry. Regularly clean residues from the drum and door gasket.

6. Only qualified technicians may modify internal wiring. Disconnect main power and wait for the inverter to fully discharge before maintenance.

7. Stop operation immediately if abnormal noise, water leakage or fault alarms occur. Contact after-sales service. Do not continue running a faulty machine.

1. Sturdy modular structure: The machine is equipped with a stainless steel shell and drum through integrated molding, ensuring high structural strength and stability, eliminating manual welding defects and avoiding equipment deformation.

2. Programmable control: The machine supports manual/automatic control, program control, time/water level setting and other control modes, effectively improving the control precision and practicability. Washing and dehydration speeds are steplessly adjustable for convenient speed control and stable performance.

3. Multifunctional integration: The machine allows the full automatic process of water intake → pre-washing → rinsing → bleaching → over-cleaning. No manual transfer is required. High-speed spin effectively reduces the residual moisture of fabrics and shortens the subsequent drying time. The cold‑water heating function enables water temperature rise for high‑temperature disinfection washing.

4. Efficient shock absorption: It has a full suspension (lower suspension) vibration avoidance system, the whole washing drum system is installed on the large-diameter spring and hydraulic shock absorber device, it has strong fatigue resistance and high shock absorption rate, there is no need to install the foundation or base, and it can be safely placed on any floor.

5. Safety protection: It takes multiple protection measures, such as emergency stop switch and safety door lock, greatly improving the operation safety and personal safety.

6. Wide application: It can hold 30kg of dry laundry in the drum and is an ideal choice for hotels, schools, laundry shops, factories and other industrial and commercial scenarios, greatly improving the washing efficiency and saving time and labor.

Control Panel

The LCD computer control panel features a clear display for real-time operating status and parameters. Well‑arranged function keys provide one‑touch access to every stage of the wash cycle. It ensures simple operation, delivering truly user-friendly man‑machine interaction for intelligent laundry control.

　

Machine Door

The machine is fitted with a widened and reinforced stainless steel sealed door. High-transparency tempered glass allows operators to observe the washing status inside at any time. The safety lock is adopted to achieve effective locking during operation so as to avoid accidental opening while the drum runs at high speed.
　

Inner Drum

The drum is integrally stamped from thickened 304 stainless steel with fine polished surface, featuring excellent corrosion resistance against detergent and humid laundry conditions. Uniform holes and optimized baffles drive textiles to tumble fully for superior cleaning performance.
　

Driving Motor

The driving motor is sturdy and durable, guarantees excellent heat dissipation during long-hour continuous operation. It achieves reliable power transmission with smooth speed switching between washing and extraction. It provides strong power, smooth startup, low noise and high reliability.

　

Vibration Absorbing System

The machine is equipped with a full suspension (lower suspension) vibration avoidance system, the whole washing drum system is installed on the large-diameter spring and hydraulic shock absorber device, and it has strong fatigue resistance and high shock absorption rate.

　

Emergency Stop Switch

The Independent emergency stop switch is used for instant machine shutdown in emergencies. The twist-to-reset design prevents accidental triggering, improving the overall operational safety and enhancing the reliability.
　

1. Startup
After power is on, the LCD shows the startup interface for 10 seconds.

2 Manual Running Mode
(1) Start Manual Running
Power on and close the door, it will enter into “Closed status”. Lock the door by pressing [stop] button. Enter “Manual mode” by pressing any of the following buttons ([Wash], [Cold Water], [Hot Water], [Heat], [Drain], [Extract], [Supply]).
(2) Change Time, temperature and level
a. Select the setting items between time, temperature or level by pressing [↑] [↓] buttons and set the value by pressing [+] and [-] buttons under the manual mode.
b. Switch the level among low level, medium level, high level and calibration level by pressing [Level] button.
(3) Stop Machine
Press [Stop] button to stop all the actions, and return to “Locked status”.

3. Automatic Running
(1) Start Automatic Running
a. On the Program selection interface, choose your desired program by pressing [↑] and [↓] buttons under “locked status”, and then press [Start] button to start the program.
b. On the automatic running interface, show the information, time, water level, water temperature and steps. Users also can change the time, speed, water level and water temperature manually.
(2) Automatic Running
When the machine is running, the user can pause, continue or stop the machine, can change time, speed, water level and water temperature manually, and also can advance to a new step.
(3) Pause and Continue
When the machine is running, the user press [Start] button to stop the machine. On the pause status, all the actions are stopped, and the countdown time is also stopped. Press [Start] button to continue running.
Note: The extract step cannot be paused.
(4) Manual Operation
When the machine is running, the user can change time, speed, water level and water temperature manually.
(5) Advance Step
When the machine is running, the user can skip to the next or above step by pressing [+] or [-] button.
(6) End Automatic Running
After completing the last step or press [Stop] button, the controller becomes ending status. The controller beeps on to clue the user, and you can stop the buzzer by pressing [Start] button during the beeping time. The user also can lock or unlock the door, and run this program again immediately.

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.