220V Steam Label Shrink Machine Bottle Sleeve Labeling Machine with 24KW Steam Generator 304 Stainless steel

2. The power supply must be equipped with an independent supporting control switch, overload protection, and leakage protection switch. It should be connected to reliable grounding protection, and wiring must meet the corresponding power standards. All grounding must comply with national regulations.

3. Power supply voltage must be maintained within ±5% fluctuation range, otherwise equipment operation may be affected. For 220V connections, correctly identify the neutral wire (marked 'N') to prevent incorrect wiring.

4. Do not reach your hands into the heating chamber or touch the heating tunnel casing while the machine is operating to prevent burns.

Four-layer Jet Nozzle System
The four-layer jet nozzle design features adjustable spray length, direction, and intensity, ensuring uniform heat-shrinkage of labels. This effectively eliminates wrinkles and deformation issues, significantly improving packaging qualification rates and overall shrinkage performance.

Steam Jet Nozzle‌
The steam nozzles feature adjustable angles and coverage range on both sides of the machine, ensuring uniform steam distribution across packaging containers of various shapes to enhance label shrinkage smoothness and adhesion quality.

Steam Exhaust Port
Equipped with a steam exhaust port, it allows for external piping connections to rapidly discharge residual steam and balance chamber pressure, preventing condensate accumulation that could compromise label shrinkage quality.

Overflow Port
When the pressure inside the steam generator exceeds the set value, the overflow port will automatically open to release excess steam to ensure safe operation of the equipment.

Water Intake
The main function of the water inlet is to ensure a stable flow of water into the steam generator, providing the necessary water supply for subsequent steam generation.

Drain Valve
After each use, promptly drain residual wastewater and steam from the furnace. If the equipment is not in use, keep the drain valve fully open at all times.

Guardrail
Guardrails are installed on both sides of the conveyor belt to prevent bottles from tipping over. The spacing between guardrails can be adjusted to accommodate bottles of different diameters.

Control Panel
The control panel integrates comprehensive functions including operational speed adjustment, temperature adjustment, water refill indicator, power indicator, heating indicator, fan switch, and more. Its intuitive layout ensures clear visibility and user-friendly operation.

Fan
There is a fan installed above the heating chamber, which generates circulating airflow to prevent localized overheating during the heating process and ensures more uniform heat distribution. This results in excellent packaging quality.‌

Chain-mesh Conveyor Belt
The shrink machine adopts a high quality chain-mesh conveyor belt with evenly distributed pores, flat surface, and stable operation. It features high load-bearing capacity, superior tensile strength, and heat resistance, ensuring no deviation during operation for optimal shrink-wrapping results.

Air Damper Adjustment
The air damper adjustment primarily regulates airflow distribution within the heating chamber. Its key feature is precise control over air volume and direction, ensuring uniform circulation of steam and hot air to prevent localized overheating or temperature disparities.

Note: Before use, carefully check whether all parts are properly installed and ensure all connections are tightly secured. Then proceed according to the operating procedure.

Operating Procedure:
(1) Open the water supply valve;
(2) Connect the power supply;
(3) Turn on the power switch: Check if the power indicator light is on;
(4) Check if the water refill indicator light is on;
(5) After water refill is completed, check if the water refill indicator light turns off;
(6) When the water level is normal, check if the heating light is on;
(7) After 5~10 minutes, check if the temperature display reaches 100℃;
(8) Adjust the conveyor chain mesh to the appropriate speed for shrinking;
(9) After use, turn off the power and drain the wastewater.

Steam Label Shrink Machine with Steam Generator *1

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.