25Kg Three-in-one Plastic Granule Dehumidifier Dryer 220V

1. The installation site of the machine should take into account the situation of other equipment and material stacking, and it is recommended to leave appropriate space around it.

2. The machine's working environment requires a clean and tidy room. When drying raw materials that may generate toxic gases, reserve space for installing an exhaust system.

3. Please note: Due to the high power consumption of this product, a power plug is not included. We recommend that the buyer consult a professional electrician for the installation of a suitable circuit breaker.

Photosensor Hopper
The photosensor hopper is equipped with a high-precision photosensor, delivering high-accuracy control and unattended operation. It enables rapid and precise material conveyance, achieving fully automated replenishment control.

Fan
The copper-core motor not only delivers powerful and stable power output but also effectively suppresses operational noise, ensuring the equipment maintains low-decibel and smooth operation throughout the plastic drying process.

Double-layer Stainless Steel Insulated Drying Hopper
Utilizing a bottom-blown air duct design, it fundamentally prevents defects like bubbling and embrittlement caused by heat loss or uneven temperatures, thereby minimizing thermal energy waste and enhancing drying efficiency.

Microcomputer Control Panel
This system features a display screen for setting the regeneration temperature and showing the actual temperature, allowing adjustment of the honeycomb rotor's rotation speed.

Enlarged Viewing Port
Featuring an openable inspection door design, it allows operators to visually monitor the material drying status and remaining level. With excellent sealing and easy cleaning, it significantly enhances maintenance efficiency and production safety.

Built-in Electrical Control Box
It utilizes a high-precision temperature control module to ensure stable performance. The PID algorithm precisely regulates the regeneration temperature, guaranteeing efficient desorption of the honeycomb rotor and maintaining a stable dew point below -40℃.

1. Working Principle: Air is blown into the heating tubes within the drying cylinder via a fan. The temperature controller regulates the air supply temperature, creating a uniform airflow within the drying cylinder to achieve the drying effect.

2.  The insulated drying hopper adopts a bottom-blowing air duct design, paired with a cyclone exhaust device to prevent heat loss and improve drying efficiency.

3. It is matched with a closed-loop feeding system, which prevents the dried material from re-absorbing moisture due to contact with external air.

4. All contact components and raw materials of this machine are made of stainless steel, preventing contamination of the raw materials.

5. The machine delivers uniform hot air distribution for high drying efficiency. Its proportional-integral temperature controller maintains temperature within ±3℃ tolerance.

6. This machine dries raw materials dampened during packaging and transportation while removing surface moisture. It is suitable for PP, PE, ABS, PVC and other raw materials.

1. Please ensure all installation and adjustments are complete.

2. Turn on the power supply inside the control box and activate the power switch on the dehumidifier panel.

3. Refer to the on-screen operation flow to configure settings.

4. After completing the following steps, press the start button to initiate automatic operation.

5. For initial use or after prolonged shutdown, perform internal circulation dehumidification first to ensure drying quality.

6. To stop operation during this period, press the stop button to initiate a cooling shutdown.

7. If an abnormality occurs during operation, an alarm will sound and a warning light will illuminate. (However, the alarm will not clear after shutdown; personnel must turn off the power and perform thorough troubleshooting.)

8. The timer switch setting can be used for pre-startup.

9. The control box contains a honeycomb wheel speed control (do not adjust arbitrarily).

10. Please ensure personnel safety during troubleshooting.

11. Disconnect the dehumidifier's main power supply.

12. Exercise caution around high-temperature pipes to prevent burns.

Note: The dehumidifier undergoes a cooling-down process before shutdown, resulting in a perceived delay in stopping.

Suction Gun *1

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.